Quick facts
- Epoxy Art Resin on this site
- Two-component, water-clear self-levelling art and decorative surface product
- Polyester family on this site
- Separate resin routes for published reinforced FRP applications
- Selection trigger
- Finished product role and whether reinforcement is involved
- Do not transfer
- Technical, cure, handling or compatibility assumptions between systems
Begin with the component, not a broad resin name
Epoxy Art Resin and polyester resin may both be described broadly as resin, but this site publishes them for different product roles. Epoxy Art Resin is the water-clear, self-levelling route for artistic and decorative surface work; the Unsaturated Polyester Resin family is a separate route for published reinforced FRP applications.
The selection question is whether the requirement is an open decorative surface or a reinforced FRP component. Do not treat a shared word such as clear, gloss or resin as proof that systems are interchangeable.
Keep the product documents separate
Use the current Epoxy Art Resin TDS for the Art Resin route and the current product-specific TDS for the polyester product under review. Do not transfer technical values, curing assumptions, handling information or compatibility claims from one system to the other.
If a buyer is unsure whether a reinforcement, mould-side surface layer, decorative surface coat or contained cast is required, document that uncertainty in the enquiry and request product-role discussion first.
A focused comparison enquiry
Share the finished article, whether reinforcement is involved, surface or casting role, expected quantity, appearance requirement and delivery location. Add any drawing, purchase specification or existing material reference where available. This creates a reviewable question without implying a technical recommendation before the actual requirement is known.
Published system comparison
| Decision point | Epoxy Art Resin | Unsaturated Polyester Resin family |
|---|---|---|
| Published role | Self-levelling artistic and decorative surface work | Separate product family for published reinforced FRP requirements |
| Buyer starting question | Is the requirement an open visible art or decorative surface? | Is the requirement a reinforced FRP component? |
| Related product route | Epoxy Art Resin | Unsaturated Polyester Resin and the relevant grade |
| Technical reference | Current Epoxy Art Resin TDS | Current product-specific polyester-resin TDS |
This guide compares only the product roles published on this site. Review the current TDS and actual requirement before selection.
Frequently asked questions
Is Epoxy Art Resin a polyester resin?
No. This site publishes Epoxy Art Resin as a separate two-component epoxy product. Polyester-family products are listed separately for their published FRP roles.
Which system should I ask about for a reinforced FRP component?
Start with Unsaturated Polyester Resin or the relevant listed grade, then review the current product-specific data for the component and process.